Country/Region | china |
---|---|
Company | Zhejiang Chaowei Energy & Power Co.,Ltd |
Categories | Electric Vehicle Batteries |
Telephone | +86-572-6200283 |
ICP License | Issued by the Chinese Ministry |
Model NO.:EV12-100A | Type:Lead-Acid Batteries |
Usage:Car, Electric Bicycle | Nominal Voltage:12V |
Discharge Rate:High Discharge Rate | Shape:Square Battery |
Electrolyte:Acid | Installation:Packaged |
Rechargeable:Chargeable | 36kg:332*176*215 |
Trademark:Chilwee | Specification:ISO9001ISO14001 |
Origin:ChangxingZhejiang Province, China | HS Code:850720000 |
Construction:
Positive plates - Pb-Sn alloy
Negative plates - Balanced lead-calcium grids for improved
recombination efficiency
Separators - Advanced AGM separators for high pressure cell design
Electrolyte - dilute high purity sulphuric acid
Battery container and Cover - ABS
Pillar seal -100% factory tested, proven two layers epoxy resin
seal
Relief valve - complete with integrated flame arrestor
Features:
Extra Long Life:Chilwee EVF Series are designed with high quality grid alloy
enables the grid with features of anti-corrosion, low gas emission
and excellent deep cycle performance, as well as hign density and
special deep cycle lead paste prescription is adopted to ensure
extra long cycle life. The cycle life may reach 600+ cycles @ 80%
DOD
High Capacity and High Energy Density:Chilwee EVF Series are designed with adequate active material and higher electrolyte density to increase the battery's capacity within certain dimension and weight, so as to keep the battery with high energy density to be compatible with most of the electric vehicle without providing extra space to install batteries.
High Reliability and Safety:High strength ABS battery container and lid, perfect safety valve design, and high strength & excellent large current electroconductivity copper terminal design are adopted to ensure the Chilwee EVF Series with high reliability and safety at extreme condition.
High Environmental Adaptability: Chilwee EVF Series adopts special fumed silica Gel in electrolyte and special Gel type separator to prevent electrolyte sratification. This can significantly improve the battery's service life and environmental adptability
Non-Cadmium Design, Environment-friendly: Chilwee Battery has adopted internationally leading technology - container formation non-cadmium production technology, which is in the leading position in the industry. It helps to save energy 28.5%, save water 90%, and non-discharge of waste water.
Application:
1.Electric vehicles, i.e. electric car, tricycles, etc.
2.Low speed road vehicles, i.e. golf cart, electric resort car, etc. 3.Electric engineering machines, i.e. forklift, lifting platform, sweeper, scraper, etc. 4.Renewable energy storage, i.e. solar/wind energy system 5.Other devices require DC power supply
Warnings:
- NP series batteries have acid in the case and are fully charged
before leaving factory. Do not attempt to dismantle the battery, if
accidental skin/eye contact is made with electrolyte, seek medical
advice immediately.
- Do not use a new battery with an old one.
- Do not use the battery in sealed container.
- Each battery should have detailed record including the ex-factory
date, installing date and using record.
- Check the connection of wire in a fixed interval (once a year).
If there is any looseness should tighten the wire.
- Wipe the surface of the battery with soft cloth in a fixed
interval (once three months) and always keep the battery clean.
- Avoid using any kind of organic solvents for cleaning the surface
of the battery.
Company Information:
Chilwee Group (Briefly named Chilwee” hereinafter) was established in 1998, and headquarter is located in Changxing County, Zhejiang Province, China. Chilwee is the industry’s leading company w
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们
Copyright © 2009 - 2018 pysqlite.org. All rights reserved.