Hot sale CSN-A2 58mm panel thermal qr code printer with good
The printer comes with a set of power and data cables but without a
power supply. It can work in power 5- 9V/12V, with the current of
3A, so please get a power supply with more than 3A output capacity.
- Smart appearance
- Easy paper loading
- Different interfaces optional
- Low noise thermal printing
- Front panel Size: 103 W*57H mm
- Embedded depth: 50 mm
- Medical Equipment
- Measuring equipment
- Security equipment
- Analyzing instrument
|Printing Method||Thermal Line|
|Paper Type||Thermal Paper|
|Paper Roll Diameter||Max:39mm|
|MCBF||5 million lines|
|Power Supply (Adapter)||DC5V-9V/12V|
|Installation Port Size||103*57mm|
1, Please notice, the ESD wrist ring and the humidity manufatures
ETC, when using the printer, to protect the inner elctrontic parts
of the printer from the damage of ESD, because the TPH of the
Printer and photoelectric sensor are ESD Sensitive parts.
2, For protecting plastic shaft, don’t smear any oil or others on
the rubber parts.
3, Don’t touch the TPH, TPH having the palm oil, will induce the
usage of the printer.If any oil or others in the TPH, pls using an
alcohol cotton stick clean the area between plastic shaft and
printer head at once.PS,Don’t strike the TPH.
4, Due to the printer is easy-paper structure,you need pick up the
rubber stick only push the rubber stick.So,if the paper jam,push
harder will cause the rubber stick gearwheel damaged.so pls don’t
push the paper harder, pls do open the cover and re-fill the paper
5, The temperature of the TPH protection must be below 65℃, if you
print continously,Because the exterior of the temperature of the IC
protection & motor can’t not over 90℃ to protect the motor
6, Pls use the good quality paper, because the sensetive of the
paper will infuence print effect, meanwhile, rough paper will
incease the excessive wear to the printer head, and reduce the life
of the printer.