Our top quality Wood shaver machine can process logs, branches (branches) and board edges into wood
shavings. The shavings produced by the wood shavings and the wood
shavings produced by the furniture factory fully automatic feeding
equipment greatly increase the production speed and save time and
manpower ,The total supporting power of about 11-37 kilowatts, the
output can reach 500kg - 1000kg per hour, this product has a large,
small for your choice.
The composition of the wood shaver machine:
The utility model comprises a rack, a platform arranged on a rack,
a rack fixed on the platform, the timber enters the machine through
a feed inlet, sliced through a blade inside the machine, shavings
are spewed out, the shavings come out in the same size and
thickness, There is no difference between shavings handmade by the
The main technical parameter of our wood shaver machine:
|Cutter head diameter||400mm||600mm||800mm||1000mm|
|Main shaft rotary speed||450r/min||450r/min||400r/min||600r/min|
When you use wood shaver machine, it is not avoiding that it can come across some failure, the
following information will introduce you, what you should do, when
the condition existence.
Wood shaver machine failure and solution:
(1) Wood shaving machine belt easy to bite when used, because the
motor rotor and wood shredder rotor is not the same, you can move
the motor left or right position, or under the motor foot pad to
adjust the two concentric rotor degree.
(2) Wood shaving machine output is relatively low. Cause: The blade
is not sharp or the knife is not adjusted to the proper position.
Solution: Remove the knife, sharpen the blade, adjust the blade to
the appropriate chip position.
(3) feeding difficult knife struggling. Reason: knife wear serious
set knife gap is too large or too small. Solution: Sharpen the
blade to ensure sharp blade. Adjust the knife gap 2-3mm, blade
angle can not be greater than 30 °.
(4) feeding too fast machine crashes. Reason: uneven feeding speed,
the blade is not sharp. Solution: Uniform feed, to ensure that no
material storage crushing warehouse. Sharpen the blade to make the
(5) Bearing fever. Reason: There is no grease in the bearing
housing, the bearing housing is not installed flat, the bearing is
damaged. Belt installed too tight. Solution: add grease within the
bearing, bearing school balance, new bearings, adjust the belt
tight, the device work properly.
Gelgoog Machinary Co.,LTD is a professional machinery produce
company who mainly designs, manufactures and sales food processing
machines,Packing Machines,Wood Processing Machines,Etc.The Machines
has been exported to USA, South America, Australia, New Zealand,
Russia, Malaysia, Singapore, Thailand, Philippines, Vietnam,
Mid-east and most of the countries in Europe.
(1) Engineers available to service machinary
(2) Fast delivery and meet seaworthy standard
(3) Offer product photo and full set customs documents
(4) Any problem will solve within hours
If you have great interest in our wood shaver machine, please feel free to contact me. Very happy to do more for you.
Any problem you can contact freely,or visit website freely.